TECHNICAL DATA SHEET
VUKO Antifreeze -32 (Super G12+ Yellow)
High-quality coolant
SPECIFICATIONS
ASTMD3306 | D4985
DESCRIPTION:
Antifreeze -32 (Super G12+ yellow) is a ready-to-use, high-quality coolant with enhanced corrosion protection. It is formulated with monoethylene glycol and premium additives from the German concern BASF.
Important: The product does not contain glycerin, which ensures stable heat dissipation and full compliance with G12+ standards.
Important: The product does not contain glycerin, which ensures stable heat dissipation and full compliance with G12+ standards.
ADDITIONAL INFORMATION:
Segments: Passenger vehicles | Commercial transport | Agricultural machinery
Available in: 1kg | 5kg
Available in: 1kg | 5kg
OEM APPROVALS:
G12+ | Audi/Seat/Skoda/VW TL 774-D/F (G12) | Ford WSS-M 97B44-D | MAN 324 SNF | MB 325.3 | MTU MTL 5048 | Scania TI 02-98 0813 T/B/M sv
BENEFITS:
- Multimetal Protection: Effectively protects aluminum, cast iron, copper, steel, and brass parts.
- German BASF additives: Ensure stable system operation throughout the entire service life.
- Cavitation protection: Reduces the risk of damage to the water pump and cylinder liners.
- Thermal stability: A high boiling point prevents engine overheating in summer, and the crystallization temperature ensures a start in winter.
- Neutral to seals: Fully compatible with rubber hoses and gaskets, prevents them from drying out.
- Where is it used?
- Designed for cooling systems of modern gasoline and diesel engines in passenger cars, trucks, and special equipment. Recommended for engines made of lightweight metals (aluminum alloys) where a high level of heat dissipation is required.
-  
TYPICAL PROPERTIES:
| Characteristic | Value | Unit |
|---|---|---|
| Color | yellow | – |
| Density at 20°C | 1,030 – 1,090 | g/cm³ |
| Crystallization temperature | -28 | °C |
| Hydrogen level (pH) at 20°C | 7,5 – 11,0 | – |
| Alkalinity | not less than 1 | cm³ |
| Foaming | no more than 30 | cm³ |
| Corrosive effect on metals: | Withstands | g/m² per day |
| Copper, brass, steel, cast iron, aluminum | to 0.2 | g/m² |
| Solder | up to 0.3 | g/m² |