TECHNICAL DATA SHEET
VUKO Antifreeze -40 (Super G12+ Yellow)
High-quality coolant
SPECIFICATIONS
ASTMD3306 | D4985
DESCRIPTION:
High-quality yellow coolant for modern gasoline and diesel engines (including light metal engines) operating in various seasonal and climatic conditions.
Does not contain glycerin!
Antifreeze Super G12+ (yellow) - will protect your engine from freezing, overheating, corrosion, and the formation of harmful deposits. Reliable protection for cast iron, aluminum, copper, and steel engine metal parts.
Antifreeze Super G12+ (yellow) is made from monoethylene glycol and special anti-corrosion additives from BASF.
Does not contain nitrites, amines, silicates, borates, and phosphates.
Does not contain glycerin!
Antifreeze Super G12+ (yellow) - will protect your engine from freezing, overheating, corrosion, and the formation of harmful deposits. Reliable protection for cast iron, aluminum, copper, and steel engine metal parts.
Antifreeze Super G12+ (yellow) is made from monoethylene glycol and special anti-corrosion additives from BASF.
Does not contain nitrites, amines, silicates, borates, and phosphates.
ADDITIONAL INFORMATION:
Segments: Passenger vehicles | Commercial transport | Agricultural machinery | Small appliances
Engine type: Gasoline | Diesel
Available in: 1kg | 5kg | 10 kg
Engine type: Gasoline | Diesel
Available in: 1kg | 5kg | 10 kg
OEM APPROVALS:
G12+ | Audi/Seat/Skoda/VW TL 774-D/F (G12) | Ford WSS-M 97B44-D | MAN 324 SNF | MB 325.3 | MTU (MTL 5048) | Scania TI 02-98 0813 T/B/M
BENEFITS:
- Excellent corrosion protection for cooling systems made of steel, aluminum, cast iron, copper, brass, and soft solder
- Reduces the probability of cavitation damage
- Compatible with rubber seal parts
- Warns of foaming
- Frost and overheating protection due to a higher boiling point. Increased refrigerant strength.
TYPICAL PROPERTIES:
| Characteristic | Value | Unit |
|---|---|---|
| Color | yellow | – |
| Density at 20°C | 1,040 – 1,100 | g/cm³ |
| Crystallization temperature | -38 | °C |
| Hydrogen level (pH) at 20°C | 7,5 – 11,0 | – |
| Alkalinity | no less than 2 | cm³ |
| Foaming | no more than 30 | cm³ |
| Corrosive effect on metals: | Withstands | g/m² per day |
| Copper, brass, steel, cast iron, aluminum | to 0.2 | g/m² |
| Solder | up to 0.3 | g/m² |