Silicone Spray — TECHNICAL DATA SHEET ← Back to product
TECHNICAL DATA SHEET
Silicone Spray
Silicone oil
Silicone Spray
ADDITIONAL INFORMATION:
Segments: Passenger Cars | Commercial Vehicles | Agricultural Machinery | Small Equipment
Available in: 0.4 L
BENEFITS:
  • Prevents friction, squeaking, drying out, and freezing.
  • Надійно захищає пластикові, гумові, металеві та дерев'яні поверхні.
  • Ensures smooth movement of parts over a wide temperature range.
  • Provides surfaces with antistatic, water- and dirt-repellent properties.
  • Полегшує монтаж та демонтаж з'єднань.
  • How to use.
  • It is recommended to clean surfaces before application. Shake the can. Apply the product to the surface in small amounts, and wipe off excess with a dry, clean cloth.
TYPICAL PROPERTIES:
Characteristic Value Unit
Characteristic Meaning Units of measurement
The gauge pressure at 20 ºC 0,2 – 0,4 MPa
Gauge pressure 2,0 – 4,0 kgf/cm²
Drying time at 20 (±2) ºC no more than 20 xv
Mass fraction of non-volatile substances 20 – 45 %
Specific gravity at 15 ºC 0,8 g/cm³
Degree of content evacuation not less than 97 %
PACKAGING
Packaging Article Number. Barcode
0.4 L 25964
STORAGE CONDITIONS:
Protect from direct sunlight and heating above +50°C! Do not spray near open flames, hot surfaces, or other sources of ignition. Do not inhale, do not disassemble, do not deform! Dispose of the used can as household waste! Store at temperatures from -20°C to +50°C. CAUTION: container under pressure! DO NOT PUNCTURE OR INCINERATE! FLAMMABLE! Shelf life 5 years from the date of manufacture provided storage rules and package integrity are observed.