TECHNICAL DATA SHEET
VUKO SYNTHETIC DIESEL 10W-40
Synthetic engine oil for diesel engines
SPECIFICATIONS
SAE10W-40|ACEAE11 | E8 | E6 | E9|APICI-4 | CJ-4|JASODH-2
DESCRIPTION:
Synthetic engine oil for lubricating diesel engines of main-line equipment operating under high loads and speeds with extended service life. The replacement interval can be up to 100,000 km.
Suitable for commercial vehicles with EGR and SCR systems (Exhaust Gas Recirculation and Selective Catalytic Reduction) with or without a Diesel Particulate Filter (DPF).
Developed using the latest technologies, this oil features a reduced ash content, which is crucial for extending the service life of diesel particulate filters.
Suitable for commercial vehicles with EGR and SCR systems (Exhaust Gas Recirculation and Selective Catalytic Reduction) with or without a Diesel Particulate Filter (DPF).
Developed using the latest technologies, this oil features a reduced ash content, which is crucial for extending the service life of diesel particulate filters.
ADDITIONAL INFORMATION:
Segments: Commercial transport | Agricultural machinery
Engine type: Diesel
Oil base type: Synthetics
Engine type: Diesel
Oil base type: Synthetics
OEM APPROVALS:
Cummins CES 20076 | Cummins CES 20077 | DAF HP2 | Deutz DQC-IV–10 LA | DTFR-Approval 15C110 | Mack EO N | MAN 3477 | MAN M 3277 | MTU Type 3.1 | Scania Low Ash | MB 226.9 | MB 228.51 | Renault RXD | Renault VI RLD-2 | Volvo VDS-4
BENEFITS:
- Allows increasing the oil change interval to 100,000 km mileage when using original consumables and quality fuel
- Consistently high performance in various operating modes throughout the entire service life
- Absence of high-temperature and low-temperature deposits in the engine
- Improved anti-foaming properties, significantly reducing the risk of foam formation in the valve hydraulic drive system
- Compatibility with all rubber seals
- Low Ash.
TYPICAL PROPERTIES:
| Characteristic | Value | Unit |
|---|---|---|
| Kinematic viscosity at 100°C | 14,9 | mm²/s |
| Density at 20°C | 856 | kg/m³ |
| Viscosity index | 151 | – |
| Alkalinity number | 10,1 | mg KOH/g |
| Open crucible flash point | 240 | ˚C |
| Pour point | -38 | ˚C |